After all, lubrication can play a very important role for the mucking loader. Not to mention other things, it can only reduce the wear and tear between the accessories of the small slag scraper. The manufacturer of the mucking loader said that it can also maintain the use of accessories life. These two points are very important. Of course, there are some prerequisites for this, that is, the lubrication is correct.

In the lubrication treatment of the accessories of the mucking loader, the structural type and usage status of the equipment's operating parts determine the amount of refueling, which is usually clearly regulated and required in the equipment's instruction manual.

The maintainer should replenish the lubricating oil in an appropriate amount according to the instruction manual, the oil standard or oil dipstick and the window of the equipment configuration. Excessive filling of lubricating oil will be harmful and useless. Moreover, due to the differences in the working methods and states of each part of the equipment, there are strict requirements for the refueling cycle, the amount of refueling each time and the method of refilling at each lubrication point.

When lubricating the accessories of the mucking loader, it should be strictly implemented according to the above requirements, and a little oil cannot be added at will, which is difficult to meet the lubrication requirements.

Only by using lubricating oil correctly and reasonably can the slag scraper ensure the lubrication effect, thereby ensuring the service life of the accessories and reducing wear. Of course, everyone should also remember not to over-lubricate, and to grasp the degree of lubrication, so as not to cause other damage to the accessories.