Zhongliang is a professional manufacturer of mining and construction equipment, the company can produce high-quality mucking loader attachments like drum cutters with sufficient supply and reasonable price.
A drum cutter is an attachment with rotating drums equipped with picks, strategically positioned around the outer diameter, are rotated by a hydraulic motor at several hundred revolutions per minute to cut rocks, concrete or frozen ground.
Transverse Drum Cutter
Model: ZWY-80
Specification: 1100mm x 600mm
Introduction: This transverse drum cutter is installed mainly on excavators of 10-18 tons.
Features: Low noise, low vibration, and environmental-friendly.
The construction is safe and efficient, and the particles excavated by milling are small and can be directly used as backfill.
It is flexible to use and can be used according to the working environment, such as ditch milling and digging wheels, rock picks, slag scraper buckets, etc. Replacement is simple and convenient.
Easy to install, economical to maintain, and can replace tools such as buckets and breakers, bringing great fun and strong power to your construction in the new era.
Drum Cutter Working Video
Model Item |
ZWY-80/45L | |
Loading Capacity (m³/h) | ≥80 | |
Weight (kg) | 8000±5% | |
Min. Turning Radius (m) | ≥7 | |
Ground Clearance (mm) | 300 | |
Excavation Width (mm) | ≥3653 | |
Excavation Distance (mm) | ≥1729 | |
Excavation Height (mm) | ≥3778 | |
Excavation Depth (mm) | ≥592 | |
Loading Width (mm) | ≥2350(can be extended) | |
Unloading Height (mm) | ≥1560(can be heightened) | |
Gradeability (°) | ≤30°(hard rock) | |
Travelling Speed (m/s) | 0.4 | |
Speed of scraper chain (m/s) | 0.65 | |
Motor Total Power (kW) | 45 | |
Voltage (V) | 660V/380V | |
Rated Working Pressure Mpa | 20 | |
Packaging | Length (mm) | 7340±50 |
Width (mm) | 1850±50 | |
Height (mm) | 2135±50 | |
Applicable Section (M) | 2.8(Width)×2.8(Height) | |
Applicable Slope | ≤27-32°(hard rock) | |
Applicable Rock Hardness | f (RockwellHardness) ≤12 | |
Note | Special customization, all parameters are based on the actual product |
Welcome to send your message to us