During the construction, if a good mucking loader is used, it will save a lot of trouble for the construction of the project. In order to ensure the stability of the electrical system of the small type mucking loader, a number of protections will be set up for the electrical system.

  

First of all, pay attention to check the motor, switch and power supply voltage of the small type mucking loader. Only by ensuring that all aspects are normal, which can ensure the normal operation of the motor, so as to effectively ensure the continuation of the project. The motor should be regularly removed for maintenance. Clean the bearing and add proper amount of grease. When performing motor maintenance work, be careful not to disassemble some parts of the slag removal machine at will, such as brake wheels and fan cover.

The disassembly sequence is as follows, the whole machine is disassembled from the matching main engine. Then disassemble in the order of: fan cover (end cover) - lock nut - fan brake wheel - front end cover - rotor assembly - rear end cover, do not disassemble randomly.

If there is a situation where it cannot be operated, it is necessary to pay attention to check whether the running parts of the small type mucking loader are seriously stuck, and check the mining face, because if there is serious unevenness, it will also affect the normal operation of the motor.

When all the disassembly is completed, attention should be paid to the installation work. The motor of the mucking loader needs to be installed in a flange. Through our introduction, everyone must know the details. If you need to consult, welcome to consult at any time.